How to use the Autel MaxiTPMS TS608 service function to register a new battery to a BMW E90 335i 2008. This process can be done using the TS608, Any MaxiSys tool via Service, MX808, and the MD802. All the steps are the same for each tool.
Connect TS608 with vehicle via main test cable
Select Service function->BMS->BMW->Auto selection->Auto read VIN
Read vehicle information and confirm
Select Hot Function->Register battery replacement->2 Register battery replacement
The battery change is entered in the DME/DDE in the next test step.
Procedure the following state:
Engine off
Terminal 15 on
Entry cannot be cancelled. Currently registered battery capacity: 90Ah.
Select 1 Enter battery replacement: Same capacity
Confirm is the newly installed battery an original BMW component.
Press NO to continue
The battery replacement was successfully entered in the DME/DDE.
Part 2: Register a Battery to BMW E90 with Autel MaxiSys Pro MS908P
Using the MS908P or MaxiSys Elite you can not only register a battery to a BMW you can change the type and reserve capacity of the battery you are installing. I will show you the process to register a new AGM battery in place of a lead acid battery in this BMW 335i E90.
Go to BMW information as well
Select Programming function
Autel MaxiSys displays detail vehicle info.
Select Retrofit/conversions
Select Retrofit 90Ah AGM battery
(You have lost of Retrofit capacities in MS908P )
Related article:
No comments:
Post a Comment