How to relearn BMW GT11 TPMS by Autel MaxiTPMS Tools

Here is little guide on BMW GT11 tire pressure monitor sensor relearn by using Autel MaxiTPMS Tools.

Vehicle Type:
EU BMW 7 series (gt11) 07/2015-12/2016


Frequency:
433Mhz Autel MX-sensor

OEM part number:
36106872774

OEM Manufacuturer:
Schrader
Inflate all tires to pressure indicated on tire placard.
If equipped with iDrive:

1.Turn ignition to ON position (ENGINE OFF)
2.Press iDrive controller to use "i" menu
3.Select Settings
4.Select CAR/TIRES
5.You may need to switch to the top field
6.Start engine
7.Select CONFIRM TIRE PRESSURE
8.Vehicle must be driven to complete relearn


If not equipped with iDrive:
1.Start engine
2. Hold turn signal lever in the up or down position until TPMS talltale and RESET are displayed
3.Press button at end of turn signal lever
4.Press and hold buttn at end of turn signal lever until a check appears after RESET
5.Vehicle must be driven to complete relearn

Note: The drive speed should be controlled between 16 mph (25KM/H) and 64mph (100KM/H) during the relearn process.
www.obdii365.com